TestNet Admin RPC Methods

You can fully control your TestNet by using special RPC methods. These methods are made available through the Admin RPC, which you can copy from the Dashboard.

They allow you to manipulate the network state such as account balances, block numbers, and storage to accommodate your development needs.

Calls to these RPC methods are represented by a call to virtual TenderlyCheatcodes contract.

The list of special RPC methods listed here will only work if they are called through the Admin RPC.

Network customization

• evm_increaseTime
• evm_setNextBlockTimestamp
• tenderly_setNextBlockTimestamp
• evm_increaseBlocks
• evm_mine

Send transaction

• eth_sendTransaction
• eth_createAccessList
• evm_getLatest

Unlimited faucet

• tenderly_setBalance
• tenderly_addBalance
• tenderly_setErc20Balance

Storage manipulation

• tenderly_setStorageAt
• tenderly_setCode

State revert

• evm_snapshot
• evm_revert

evm_increaseTime

Advances the blockchain time by a specified amount and creates an empty block with the new timestamp.

Subsequent calls to eth_call and eth_sendRawTransaction will get different block.timestamp values based on the blockNumber they target:

• For pending block: Returns current_time + time_increase This represents the expected timestamp of the next block to be mined.
• For latest block: Returns time_of_evm_increaseTimestamp_call + time_increase. This is the timestamp of the empty block created when evm_increaseTimestamp was called.

Parameters

• QUANTITY - hex-encoded time_increase of seconds to jump forward by

Returns

• DATA - 32-byte block hash of the newly generated block

Example request

{
  "jsonrpc": "2.0",
  "method": "evm_increaseTime",
  "params": ["0x15180"],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": "0x51e0a03f19e0c154b16363086aa6bbf22ad4582b0515b0a3a00519015f06246f",
  "id": "1234"
}

evm_setNextBlockTimestamp

Offsets current time to the specified timestamp, and creates an empty block with given timestamp.

Subsequent calls to eth_call and eth_sendRawTransaction will return different block.timestamp values based on the blockNumber they target:

• For pending block: Returns specified_timestamp + time_since_evmSetNextBlockTimestamp_call. This represents the set timestamp plus any time elapsed since the method was called.
• For latest block: Returns specified_timestamp. This is the timestamp of the empty block created when evm_setNextBlockTimestamp was called.

Parameters

• QUANTITY - hex-encoded specified_timestamp that represents epoch timestamp (in seconds)

Returns

• QUANTITY - integer (epoch timestamp) that is set for the next block

Example request

{
  "jsonrpc": "2.0",
  "method": "evm_setNextBlockTimestamp",
  "params": ["1750074671"],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": 1750074671,
  "id": "1234"
}

tenderly_setNextBlockTimestamp

Offsets current time to given timestamp without creating an empty block.

Subsequent calls to eth_call and eth_sendRawTransaction will return different block.timestamp values based on the blockNumber they target:

• For pending block: Returns specified_timestamp + time_since_tenderly_setNextBlockTimestamp. This represents the set timestamp plus any time elapsed since the method was called.
• For latest block: Returns the timestamp of the latest created block.

Parameters

• QUANTITY - hex-encoded specified_timestamp that represents epoch timestamp (in seconds)

Returns

• QUANTITY - integer (epoch timestamp) that is set for the next block

Example request

{
  "jsonrpc": "2.0",
  "method": "evm_setNextBlockTimestamp",
  "params": ["1750074671"],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": 1750074671,
  "id": "1234"
}

evm_increaseBlocks

Skips a number of blocks and generates a new block with the new block number.

Parameters

• QUANTITY - hex-encoded number of blocks to skip

Returns

• DATA - 32-byte block hash of the newly generated block

Example request

{
  "jsonrpc": "2.0",
  "method": "evm_increaseBlocks",
  "params": ["0x20"],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": "0x51e0a03f19e0c154b16363086aa6bbf22ad4582b0515b0a3a00519015f06246f",
  "id": "1234"
}

eth_sendTransaction

Submits an unsigned transaction.

Parameters

1. Transaction - The transaction object

• from: DATA, 20 Bytes - The address the transaction is sent from.
• to: DATA, 20 Bytes - (optional, omitted when creating new contract) The address the transaction is directed to.
• gas: QUANTITY - (optional) Integer of the gas provided for the transaction execution. It will return unused gas.
• gasPrice: QUANTITY - (optional) Integer of the gasPrice used for each paid gas.
• value: QUANTITY - (optional) Integer of the value sent with this transaction.
• data: DATA - (optional) The compiled code of a contract OR the hash of the invoked method signature and encoded parameters.

{
  "id": 0,
  "jsonrpc": "2.0",
  "method": "eth_sendTransaction",
  "params": [
    {
      "from": "0xDC6bDc37B2714eE601734cf55A05625C9e512461",
      "to": "0xff39a3e734fe363e631441f6d24c7539240c2628",
      "value": "0x0",
      "data": "0x2e7700f0"
    }
  ]
}

RESULT: Transaction hash STRING 32 byte hex value

eth_createAccessList

Returns the access tuples that would be touched by the transaction.

Parameters

• SendTransactionObject - transaction object (same as the one provided to eth_sendTransaction)
• BlockNumber - block number parameter

Returns

• AccessList - an array of access tuples touched by the transaction

Example request

{
  "jsonrpc": "2.0",
  "method": "eth_getAccessList",
  "params": [
    {
      "from": "0x7ed8dff35e6fef1a6c1f95423cd8a64e22687aac",
      "to": "0x6b175474e89094c44da98b954eedeac495271d0f",
      "gas": "0x76c00",
      "gasPrice": "0x0",
      "value": "0x0",
      "data": "0xa9059cbb0000000000000000000000005eddecc908575e1adcf857d8be380b9b7e5f658300000000000000000000000000000000000000000000000228813d891ab86000"
    },
    "latest"
  ],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": [
    {
      "address": "0x7ed8dff35e6fef1a6c1f95423cd8a64e22687aac"
    },
    {
      "address": "0x6b175474e89094c44da98b954eedeac495271d0f",
      "storage_keys": [
        "0x5051a693fd89be4fee1466db5a0684c1868dc09405da86e3d13004a803e302ec"
      ]
    },
    {
      "address": "0xc8f595e2084db484f8a80109101d58625223b7c9"
    }
  ],
  "id": 1234
}

evm_getLatest

Fetches the latest transaction ID on a network Virtual TestNet.

Parameters

Returns

• DATA - UUID of the latest Virtual TestNet transaction

Example request

{
  "jsonrpc": "2.0",
  "method": "evm_getLatest",
  "params": [],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": "4a05d7ed-f66c-471a-899d-d6d843b8e790",
  "id": "1234"
}

tenderly_setBalance

Modifies the balance of an account or accounts.

Parameters

• ADDRESS/ADDRESSES - a string or an array of account addresses
• AMOUNT - hex-encoded number of an amount in wei

Returns

• DATA - 32-byte block hash of the newly created transaction

Example request

{
  "jsonrpc": "2.0",
  "method": "tenderly_setBalance",
  "params": [["0x0d2026b3EE6eC71FC6746ADb6311F6d3Ba1C000B", "0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266"], "0xDE0B6B3A7640000"],
  "id": "1234"
}

OR

{
  "jsonrpc": "2.0",
  "method": "tenderly_setBalance",
  "params": ["0x0d2026b3EE6eC71FC6746ADb6311F6d3Ba1C000B", "0xDE0B6B3A7640000"],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": "0xc5b2c658f5fa236c598a6e7fbf7f21413dc42e2a41dd982eb772b30707cba2eb",
  "id": "1234"
}

tenderly_addBalance

Adds the balance to the provided account or accounts.

Parameters

• ADDRESS/ADDRESSES - a string or an array of account addresses
• AMOUNT - hex-encoded number of an amount in wei

Returns

• DATA - 32-byte block hash of the newly created transaction

Example request

{
  "jsonrpc": "2.0",
  "method": "tenderly_addBalance",
  "params": [["0x0d2026b3EE6eC71FC6746ADb6311F6d3Ba1C000B"], "0xDE0B6B3A7640000"],
  "id": "1234"
}

OR

{
  "jsonrpc": "2.0",
  "method": "tenderly_addBalance",
  "params": ["0x0d2026b3EE6eC71FC6746ADb6311F6d3Ba1C000B", "0xDE0B6B3A7640000"],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": "0xc5b2c658f5fa236c598a6e7fbf7f21413dc42e2a41dd982eb772b30707cba2eb",
  "id": "1234"
}

tenderly_setErc20Balance

Sets the token balance for the wallet on the provided erc20 contract.

Parameters

• TOKEN_ADDRESS - address of the ERC20 contract
• WALLET - address of the wallet that would get the balance
• VALUE - 32-byte hash representing the wei value of the tokens

Returns

DATA - 32-byte hash of the newly created transaction (storage override is committed via transaction)

Example request

{
  "jsonrpc": "2.0",
  "method": "tenderly_setErc20Balance",
  "params": [
    "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
    "0x40BdB4497614bAe1A67061EE20AAdE3c2067AC9e",
    "0xDE0B6B3A7640000"
  ],
  "id": 3640
}

Example response

{
  "id": 3640,
  "jsonrpc": "2.0",
  "result": "0x8a84686634729c57532b9ffa4e632e241b2de5c880c771c5c214d5e7ec465b1c"
}

tenderly_setStorageAt

Sets the storage of the provided address at the provided slot.

Parameters

• ADDRESS - the address where the storage will be overridden
• SLOT - 32-byte hash representing the storage slot key
• VALUE - 32-byte hash representing the value at the key slot

Returns

• DATA - 32-byte hash of the newly created transaction (storage override is committed via transaction)

Example request

{
  "jsonrpc": "2.0",
  "method": "tenderly_setStorageAt",
  "params": [
    "0x3Df2f692132f55b97cc9DA04A1fFFEA82F5d710b",
    "0x8111de210bcfef10861a4ab6df0f4838296bd61d5a8f02dca283ed3b72a47bba",
    "0x0000000000000000000000000000000000000000000000000000000000000000"
  ],
  "id": "1"
}

Example response

{
  "jsonrpc": "2.0",
  "result": "0xc5b2c658f5fa236c598a6e7fbf7f21413dc42e2a41dd982eb772b30707cba2eb",
  "id": "1234"
}

evm_snapshot

Returns a snapshot ID that allows you to revert a Virtual TestNet to a previous point (same as ID from getLatest or the header returned in every RPC request)

Parameters

Returns

1. DATA - UUID of the latest Virtual TestNet transaction

Example request

{
  "jsonrpc": "2.0",
  "method": "evm_snapshot",
  "params": [],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": "4a05d7ed-f66c-471a-899d-d6d843b8e790",
  "id": "1234"
}

evm_revert

Reverts the state of the Virtual TestNet to a previous snapshot.

Parameters

• DATA - UUID of a snapshot

Returns

• BOOLEAN - operation success flag

Example request

{
  "jsonrpc": "2.0",
  "method": "evm_revert",
  "params": ["0xaa2cbb38c3fda63fdd381583291f614603b8a7d3c0e6bed9d0672696b4c4815d"],
  "id": "1234"
}

Example response

{
  "jsonrpc": "2.0",
  "result": true,
  "id": "1234"
}

tenderly_setCode

Sets the code at a particular location. Example

Parameters

• ADDRESS - Contract address
• DATA - Bytecode

Returns

• NUMBER - transaction hash

Example request

{
  "jsonrpc": "2.0",
  "method": "tenderly_setCode",
  "params": [
    "0x1",
    "0x1"
  ],
  "id": "1234"
}